Used Dental Air Abrasion | Velopex Aquacut Quattro | Atlas Resell Management

You are here

Used Dental Air Abrasion | Velopex Aquacut Quattro

The AQUACUT’s Quattro Air Abrasion System (Velopex)unique fluid curtain suppresses the powder emissions common with air abrasion units from the past,  while simultaneously increasing cutting efficiency by constantly removing debris created during the cutting process.

The AQUACUT Quattro Air Abrasion System changes into a powerful cutting tool that will in many instances cancel the need to use the dental turbine. It is a non-contact instrument, there is no vibration, heat generation or turbine noise. most cases there is no need for an anesthetic.

Features: 
  • Contactless Dentistry
  • Pain Free Dentistry
  • Modern Adhesive Dentistry
  • Self-contained Disposable Powder Cartridges
  • Quick and Measured Refills
  • Highly Efficient StainRemoval 
  • Multi-Function Handpiece
  • Convenient Powder Cartridge System
Benefits: 
  • Promotes Conservative, tooth-friendly dentistry.
  • No chipping or stress fractures
  • Minimal removal sound tooth material
  • Quick and versatile – reduced treatment times
  • Multiple quadrants treatable on a single visit
  • Ability to cut, polish, clean and dry
  • Function Changes at the Twist of a Switch
Limitations/Considerations: 

Special consideration must be given to the use of the aquacut quattro on patients who have: -

  • Respiratory difficulties
  • Asthma 
  • Colds
  • Blocked nasal passages
  • Restricted sodium diet
  • Any other medical problem that may prevent the patient from breathing through the nose.

Note: Any patient suffering from any of the above conditions should consult their physician before having treatment with aquacut quattro.

Technical Specifications: 
  • Dimensions (Inch): 
    94 L x 9.84 W x 9.05 H
  • Weight: 
    16.5347 lbs
  • Dosing Chambers Capacity : 
    29 - 53 micro aluminium oxide or fine granular sodium bicarbonate
  • Dry Air Supply: 
    5 bar, (72 psi) and 7.5 bar, (109 psi)
  • Depressurisation Time : 
    20-30 seconds
  • Tooth Reduction Material: 
    Aluminium Oxide
  • Tooth Cleaning and Polishing: 
    Sodium Bicarbonate (fine granular )
  • Operation Type: 
    Pneumatic
  • Operating Temperature: 
    -10°C and +40°C (14°F and 104°F) and below 80% humidity.

Equipment currently available

[3]
What do we mean by ?