Used Dental Curing Lights | Kerr Demetron A.1 and A.2 | Atlas Resell Management

You are here

Used Dental Curing Lights | Kerr Demetron A.1 and A.2

The Demetron A.1 and A.2 are corded but offer different powering options to run continuously throughout the day.
The Demetron A.1 is a small, wand-style and can be installed into new or existing chair configurations.
The Demetron A.2 can be plugged into any electrical outlet making it completely portable.

  • Consistent, cool output of 1,000 mW/cm2
  • 4 mm depth of cure in 10 seconds for most materials
  • Cures all materials within the 450 to 470 nm range
  • Convenient 10- or 30-second curing cycles
  • High output
  • Fast cure
  • Comprehensive curing capability
  • Two curing modes
  • Do not look directly at the light emitted from this curing unit.
  • Do not use this device without suitable eye protection for the operator, assistant and patient.
  • Persons having a history of photosensitive reactions or who are using photosensitizing drugs should not be exposed to light from this unit.
  • Equipment is not suitable for use in the presence of a flammable anesthetic mixture with air or nitrous oxide.
  • Wipe, do not spray, solution onto plastic parts. Prevent liquids from entering openings on unit.
Technical Specifications: 
  • Voltage: 
    100-240 Volts
  • Frequency: 
    50-60 Hz
  • Current: 
    0.5 Amp
  • Power: 
    10 VA
  • Storage temperature: 
    -40˚F to 158˚F (-40˚C to 70˚C)
  • Storage relative humidity: 
    10% to 85%
  • Output peak wavelength range: 
    450 - 470 nanometers
  • Maximum Light Intensity: 
  • Length of Handpiece: 
  • Width of Handpiece: 
  • Weight of Handpiece: 
    3.70 Oz.
  • Weight of optional bracket: 
    1.69 Oz.