Used Dental Handpieces | DentalEZ Titan T ( 1560 ) | Atlas Resell Management

You are here

Used Dental Handpieces | DentalEZ Titan T ( 1560 )

The StarDental® Titan-T™ is an autoclavable air driven low-speed handpiece system manufactured with a titanium housing. 

The Titan 5K and 20K low speed dental motors are used by trained dental professionals to facilitate various dental procedures requiring cutting, drilling, polishing and pin setting.

Features: 
  • Low-Speed Handpiece System Flexibility
  • 100 - 5,000 or 100-20,000 rpm (depending on motor) speed range capability
  • LubeFree Handpiece Motor
  • 5,000 RPM and 20,000 RPM motors available
  • LubeFree Handpiece Straight Nose Cone, Motor-to-Angle Adapter and Torque Multiplier
  • Less likely to stall under higher torque requirements than other low speed motors.
  • Low-Speed Handpiece Angles
  • 360° Quick Connect Swivel
  • Enables quick disconnection of the handpiece for sterilization.
Benefits: 
  • Requires only a minimum of attachments to meet a variety of procedural needs
  • Reduces maintenance time and the high cost of repeated lubrication
  • Better Performance Under Load (Torque)
  • Minimizes operator downtime and reduces costs relative to other handpieces.
  • Reduces tubing drag for optimum operator comfort
  • Excellent longevity
  • No degradation of power during course of evaluation for the Motor and Motor-to-Angle adapter
  • Design should allow good intra-oral visibility
  • Good concentricity, low noise
  • Numerous attachments to perform a variety of procedures
Technical Specifications: 
  • Construction: 
    Titanium
  • Speed Range: 
    100-5,000 RPM (5,000 RPM Speed Motor) 100-20,000 RPM (20,000 RPM Speed Motor)
  • Air Pressure: 
    40 PSI at swivel interface (Recommended)
  • Air Flow: 
    2.1 SCFM @ 40 PSI at maximum power output at swivel interface
  • Sterilization: 
    Steam Sterilization up to 275° F (135° C)
  • Rotation: 
    Forward and Reverse
  • Lubrication: 
    Not required for motors, attachments and LubeFree angles (daily for lubricated angles)