Used Dental Surgical | Macan MC-6 | Atlas Resell Management

You are here

Used Dental Surgical | Macan MC-6

The Macan MC-6 (also know as MC-6a) is an Electrosurgical dental equipment use for dental electrosurgery. It is used to sculpture iving tissue to satisfy the clinical indicatios for soft tissue management in the Dental Health Care practice.

It works by generating intense highly localized heat intra-cellularly in tissue to achive histological effects, much the same as laser does.

Features: 
  • High-precision Dental Electrosurgery Technology
  • Versatile Design
  • Cicatrix Free CUT mode
  • Incision and excision with BLEND Mode
  • Pin-point accurate coagulation in COAG mode
Benefits: 
  • Effective for delicate and intricate tissue management in prosthodontics
  • Safe and more effective bipolar coagulation
  • Low voltage output
  • Spark Free Operations
Technical Specifications: 
  • Dimensions (Inch): 
    11.5 L x 6.5 W x 2.7 H
  • Weight: 
    6.019 Lbs.
  • Output Voltage : 
    500 V p-p (.5kVp p-p) maximum, open load, CUT mode
  • Power Requirements: 
    120v 60hz +/-10% 240 watts maximum consumption or 230 v 50 Hs +/-10% 240 VA maximum consumption
  • Source Impedance : 
    500 ohms, nominal
  • Operating Frequency: 
    3.0.mHz +/-5%, nominal
  • Power Control: 
    Manual Analog, continously variable
  • Operational Duty Cycle : 
    10 seconds ON, 20 seconds OFF (not electronicall enforced)
  • Temperature Range: 
    -20C to +85C storage, 0C to +35C, <80% RH non condensing
  • Cooling: 
    Convection
  • Spalsh Rating: 
    IP0
  • Actuation: 
    Single foot pedal
  • Active Indication: 
    LED Light, Tone
  • IEC Classification: 
    Class II medical, high frequency surgical, non-ionizing radiation device
  • Configuration: 
    Monopolar, isolated output, type BF ports