Used Dental Vacuum Pumps | Air Techniques STS-3 Dry Vac | Atlas Resell Management

You are here

Used Dental Vacuum Pumps | Air Techniques STS-3 Dry Vac

The STS 3 Single Stage Dry Vacuum System (Super Turbine Suction) is a dry vacuum pump that produces high-volume air flow with multiple users online. The STS is a medical dry vacuum pump which is designed for use in a dental facility. The CAS™ (Cyclonic Action Separator) tank will ensure that no liquids or foams enter the vacuum pump.

Features: 
  • The CAS™ (Cyclonic Action Separator) tank
  • Relief valve 
  • Dry vacuum pump
  • Multiple users online
  • Permanent split capacitor motor
Benefits: 
  • Highly reliable 
  • Tank are easily installed and maintained
  • Easily accessible relief valve
Limitations/Considerations: 
  • To prevent fire or electrical shock, do not expose this appliance to rain in or moisture.
  • Un-insulated voltage within the unit may be of sufficient magnitude to cause electric shock.
  • Cleaning agents that contain bleach or foam should not to be used in this system. These cleaners will leech mercury from amalgam and pollute our environment. Please use non- foaming, non-leaching, and biodegradable Clean Stream for proper cleaning.
  • Solids collector may contain biologically hazardous material. Wear protective gloves.Dispose of waste in approved bio-hazard container.
Technical Specifications: 
  • Dimensions (Inch): 
    23.5 W x 19.5 D x 17 H
  • Weight: 
    119 lbs
  • Voltage (Minimum/Maximum): 
    200/250
  • Full Load: 
    13 Amps
  • Starting Load: 
    65 Amps
  • Frequency: 
    60 Hz
  • Maximum Vacuum: 
    14 InHg
  • Preset Vacuum Level: 
    10 InHg
  • Tank Material: 
    304 Stainless Steel
  • Operating Temperature: 
    40 to 104°F (10 to 40°C)
  • Storage Temperature: 
    0 to 150°F (-18 to 66°C)
  • Relative Humidity: 
    90% (no condensation)
  • Maximum Exhaust Air Flow: 
    27 SCFM
  • Exhaust Fan Requirements: 
    500 CFM Minimum
  • Horsepower (each pump): 
    1.75kW or 2.3 HP
  • Current: 
    20A